Tempest
®
Wireless Intercom Systems
5
BaseStation Unique Advantages
Features Advantages Description
4 intercom channels
per BaseStation
Beltpack users can continually select between
4 intercom/program channels.
Up to 5 Beltpacks can access all 4 intercom channels and “Dual-Listen” to
2 of the 4 intercom channels on a single BaseStation.
5 full duplex
Beltpacks available
per a 1RU
BaseStation
Reduce operating costs and reduce rack space. Up to 5 full duplex Wireless Beltpacks on a single BaseStation.
2-wire and 4-wire
intercom interface
available on each
channel
Party-line and matrix intercoms can be interfaced
on different audio channels simultaneously on a
single BaseStation.
Compatible with Clear-Com, RTS, and Telex 2-wire and 4-wire intercom
systems. Tempest also allows two different 2-wire systems to be connected at
the same time.
Stage-Announce
Any Beltpack can be programmed to route their
headset microphone to a backstage public address
speaker and trigger the related contact closure.
Beltpacks can access the shared stage announce line-level output on the back of
the BaseStation.
Unique GPIO
Contact Closures
Five Beltpack users can each trigger a unique
external event or interface with external systems
that utilize GPO closures.
Each BaseStation offers 5 programmable Beltpack triggered contact closures,
one for each BaseStation.
Call Signals to and
from wired intercom
are supported
Remote users can send or receive a standard ‘Call’
alert to or from other users on the wireless or wired
intercom.
Beltpacks can send and receive audio and call-level signals including “Remote
Talk Kill” from wired intercom systems.
Auxiliary Input
A local program or other source can be routed to
any or all wired intercom channels.
The Aux input allows an additional line-level audio input to be routed to one
or more of the intercom audio channels. The selected channel and its gain are
adjustable through the user interfaces.
Auxiliary Output
Any or all intercom channels can easily be routed
to an external output for monitoring, recording or
other application.
The Aux output provides a line-level audio output. This output is often used for
recording an intercom channel. The selected channel and its gain are adjustable
through the user interfaces.
Accu-Sync™ timing
system for optimum
performance when
using multiple
BaseStations
Multiple BaseStations can be located in close
proximity while minimizing interference.
Multiple BaseStations can be co-located with minimal system performance
degradation. A master sync signal provides timing for all BaseStations creating a
multi-unit synchronous transmission system.
Optional Remote
Transceiver allows
antennas to be
placed up to 1,500
ft. from BaseStation
BaseStations can be located in equipment rooms,
production trucks or other areas that are distant
from the production area.
An RJ-45 connector enables the remote transceiver to be located up to 1,500 ft
away from the BaseStation. The data, along with power and control information,
is transmitted over standard CAT5 cable form the BaseStation.
PC-based LAN
Thin-Client control
interface
An operator can access and monitor status and
settings, and remotely adjust BaseStation and
Beltpacks.
Online system-wide conguration and monitoring from LAN interfaces.
Worldwide Power
Compatibility
Power Tempest Wireless System anywhere in the
world with virtually any power source available.
Tempest Wireless can accept AC or DC power sources, AC power: 90 – 250
VAC at 50 – 60 Hz, DC power: 11 – 32 VDC.
(36 páginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais